|
|
|
National Stock Number:
9510-00-224-2917
Federal Supply Class:
9510
National Item Identification Number:
002242917
Description:
BAR,METAL
Detail:
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL.
|
Manufacturer Information:
| MS500136-005 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | QQ-T-590 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| BASIC SHAPE STYLE | FLAT | | CROSS-SECTIONAL WIDTH | 1.500 INCHES NOMINAL | | CROSS-SECTIONAL THICKNESS | 0.5000 INCHES NOMINAL | | FABRICATION METHOD | HOT ROLLED OR FORGED | | HEAT TREATMENT | ANNEALED | | LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A600, TYPE -2 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP M2 | | NONDEFINITIVE SPEC/STD DATA | -2 CLASS AND FLAT FORM AND ANNEALED CONDITION AND HOT ROLLED OR FORGED FINISH | | WEIGHT PER UNIT MEASURE | 2.810 POUNDS PER LINEAR FOOT |
|
|