| BODY HEIGHT | 2.980 INCHES MINIMUM AND 3.020 INCHES MAXIMUM |
| BODY LENGTH | 1.860 INCHES MINIMUM AND 1.900 INCHES MAXIMUM |
| BODY WIDTH | 1.420 INCHES MINIMUM AND 1.460 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.375 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.000 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| FREQUENCY RATING | 60.0 HERTZ NOMINAL SINGLE COMPONENT |
| IMPEDANCE RATING IN OHMS | 1000.0 NOMINAL SINGLE COMPONENT SINGLE PRIMARY |
| IMPEDANCE RATING IN OHMS | 250.0 NOMINAL SINGLE COMPONENT ALL SECONDARY |
| INCLOSURE TYPE | HERMETICALLY SEALED |
| MAXIMUM TRANSFORMER POWER RATING | 6.0 MILLIWATTS SINGLE COMPONENT |
| MOUNTING FACILITY QUANTITY | 4 SINGLE GROUP |
| MOUNTING METHOD | THREADED HOLE SINGLE GROUP |
| NOMINAL THREAD SIZE | 0.138 INCHES SINGLE GROUP |
| PRIMARY TO SECONDARY TURN RATIO | 1 TO 2 SINGLE COMPONENT |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| WINDING FUNCTION AND QUANTITY | 1 PRIMARY AND 2 SECONDARY SINGLE COMPONENT |
| WINDING SHIELDING METHOD | INTERNAL SHIELD GROUNDED TO INCLOSURE SINGLE COMPONENT |
| TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 06845-A-217126 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD SERIES DESIGNATOR | UNC SINGLE GROUP |
| TRANSFORMER FUNCTION | LINE |