|
|
|
National Stock Number:
5940-00-204-5603
Federal Supply Class:
5940
National Item Identification Number:
002045603
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 21228 | 78039 | LEICA INC SURVEYING AND PHOTOGRAMMETRY SYSTEMS DIV | | SC-C-18882 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.156 INCHES | | BOARD THICKNESS | 0.188 INCHES | | BOARD CONSTRUCTION | SOLID CONSTRUCTION | | BOARD OVERALL LENGTH | 10.812 INCHES | | BOARD OVERALL WIDTH | 0.750 INCHES | | BODY STYLE | BLOCK TYPE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.500 INCHES | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.437 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.750 INCHES | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.218 INCHES | | MATERIAL DOCUMENT AND CLASSIFICATION | L-P-513,TYPE PBE FED SPEC SINGLE MATERIAL RESPONSE BOARD | | MATERIAL | PLASTIC PHENOLIC AND PAPER BOARD | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE | | MOUNTING HOLE DIAMETER | 0.149 INCHES | | SPECIAL MARKINGS | 1 THRU 6 | | SPECIAL FEATURES | TERMINAL FACILITIES JOINED IN GROUPS OF 4 | | TERMINAL FACILITY QUANTITY | 12 | | TERMINAL DESIGN | NONFEEDTHRU | | TERMINAL PATTERN ARRANGEMENT | SINGLE ROW | | TERMINAL ROW QUANTITY | 1 |
|
|