|
|
|
National Stock Number:
5935-00-224-8368
Federal Supply Class:
5935
National Item Identification Number:
002248368
Description:
DUMMY CONNECTOR,RECEPTACLE
Detail:
An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.
|
Manufacturer Information:
| 10-314985-167 | 77820 | AMPHENOL CORP | | 11041106-3 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.462 INCHES MINIMUM AND 0.472 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.953 INCHES MINIMUM AND 0.985 INCHES MAXIMUM | | CONNECTOR LOCKING METHOD | BAYONET PIN | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.953 INCHES MINIMUM AND 0.985 INCHES MAXIMUM | | INSERT MATERIAL | PLASTIC SILICONE MINERAL FILLED SINGLE MATING END | | OVERALL HEIGHT | 1.203 INCHES MINIMUM AND 1.235 INCHES MAXIMUM | | OVERALL LENGTH | 0.524 INCHES MAXIMUM | | OVERALL WIDTH | 1.203 INCHES MINIMUM AND 1.235 INCHES MAXIMUM | | MATING END QUANTITY | 1 | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | CADMIUM AND NICKEL | | SHELL TYPE | SOLID | | UNTHREADED MOUNTING HOLE DIAMETER | 0.120 INCHES NOMINAL |
|
|