5935-00-223-2998, ADAPTER,CONNECTOR

5935-00-223-2997 CONNECTOR,PLUG,ELECTRICAL

National Stock Number:
5935-00-223-2998

Federal Supply Class:
5935

National Item Identification Number:
002232998

Description:
ADAPTER,CONNECTOR

Detail:
An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and Y-shaped adapters are all ADAPTER, CONNECTOR. Excludes ADAPTER, CONNECTOR TO LAMPBASE; ADAPTER, LAMPHOLDER TO CONNECTOR; ADAPTER (1), CABLE CLAMP TO CONNECTOR; and ADAPTER, LAMPHOLDER. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see ADAPTER (1), ELECTRICAL CONDUIT.

Manufacturer Information:

MIL-DTL-26482	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILC26482	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS3119E18-11	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE	0.562 INCHES MINIMUM AND 0.592 INCHES MAXIMUM
BODY STYLE	STRAIGHT SHAPE W/FLANGE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	1.062 INCHES NOMINAL
CONNECTOR LOCKING METHOD	BAYONET PIN
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS	1000.0 ALL MATING ENDS ALL CONTACT GROUPINGS
CONTACT POSITION ARRANGEMENT STYLE	18-11 ALL MATING ENDS
CONTACT REMOVABILITY	NONREMOVABLE ALL MATING ENDS ALL CONTACT GROUPINGS
CONTACT MAXIMUM CURRENT RATING IN AMPS	13.0 ALL MATING ENDS ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENT	GOLD ALL MATING ENDS ALL CONTACT GROUPINGS
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	1.062 INCHES NOMINAL
ENVIRONMENTAL PROTECTION	MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT
INCLUDED CONTACT TYPE	ROUND PIN ALL MATING ENDS 1ST CONTACT GROUPING
INCLUDED CONTACT TYPE	ROUND SOCKET ALL MATING ENDS 2ND CONTACT GROUPING
INCLUDED CONTACT QUANTITY	11 2ND MATING END ALL CONTACT GROUPINGS
INCLUDED CONTACT QUANTITY	11 1ST MATING END ALL CONTACT GROUPINGS
INSERT POSITION IN DEG	0.0
OVERALL HEIGHT	1.328 INCHES MAXIMUM
OVERALL LENGTH	1.125 INCHES MAXIMUM
OVERALL WIDTH	1.328 INCHES MAXIMUM
MATING END QUANTITY	2
POLARIZATION METHOD	KEYWAY OR MULTIPLE KEYWAY
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD
PRECIOUS MATERIAL AND WEIGHT	0.022 GOLD GRAINS, TROY
PRECIOUS MATERIAL	GOLD
SHELL MATERIAL	ALUMINUM ALLOY
SHELL SURFACE TREATMENT	CADMIUM
SHELL TYPE	SOLID
SPECIFICATION/STANDARD DATA	81349-MIL-C-26482 GOVERNMENT SPECIFICATION
TEST DATA DOCUMENT	81349-MIL-C-26482 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
UNTHREADED MOUNTING HOLE DIAMETER	0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM

Click here to Register for Free 30-day Trial