| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING |
| BUSHING ACCOMMODATION HOLE SHAPE | ROUND W/FLAT |
| CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL AND INTERNALLY THREADED COUPLING RING |
| CONTACT MATERIAL | COPPER ALLOY ALL MATING ENDS ALL CONTACT GROUPINGS |
| CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,COMP 22,1/2 H FED SPEC SINGLE MATERIAL RESPONSE ALL MATING ENDS ALL CONTACT GROUPINGS |
| CONTACT POSITION ARRANGEMENT STYLE | N 1ST MATING END |
| CONTACT POSITION ARRANGEMENT STYLE | SM 2ND MATING END |
| CONTACT REMOVABILITY | NONREMOVABLE ALL MATING ENDS ALL CONTACT GROUPINGS |
| CONTACT SURFACE TREATMENT | GOLD ALL MATING ENDS ALL CONTACT GROUPINGS |
| INCLUDED CONTACT TYPE | COAXIAL PIN 1ST MATING END ALL CONTACT GROUPINGS |
| INCLUDED CONTACT TYPE | COAXIAL SOCKET 2ND MATING END ALL CONTACT GROUPINGS |
| INCLUDED CONTACT QUANTITY | 1 1ST MATING END ALL CONTACT GROUPINGS |
| INCLUDED CONTACT QUANTITY | 1 2ND MATING END ALL CONTACT GROUPINGS |
| INSERT MATERIAL | PLASTIC TETRAFLUOROETHYLENE ALL MATING ENDS |
| OVERALL DIAMETER | 0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM |
| OVERALL LENGTH | 1.438 INCHES MINIMUM AND 1.498 INCHES MAXIMUM |
| MATING END QUANTITY | 2 |
| NOMINAL THREAD SIZE | 0.250 INCHES AND 0.625 INCHES AND 0.312 INCHES |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD AND SHELL SURFACE SILVER |
| PRECIOUS MATERIAL AND WEIGHT | 0.010 SILVER GRAINS, TROY AND 0.100 SILVER GRAINS, TROY |
| PRECIOUS MATERIAL | GOLD AND SILVER |
| RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 ALL MATING ENDS ALL CONTACT GROUPINGS |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,COMP 22,1/2 H FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL MATERIAL | COPPER ALLOY |
| SHELL SURFACE TREATMENT | SILVER |
| SHELL TYPE | SOLID |
| SPECIFICATION/STANDARD DATA | 80063-SM-A-588123 GOVERNMENT STANDARD |
| TEST DATA DOCUMENT | 80063-SM-A-588123 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD CLASS | 2A AND 2B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 36 AND 24 AND 32 |
| THREAD SERIES DESIGNATOR | UNS AND UNEF |
| THREADED DEVICE TYPE | COUPLING FACILITY AND MOUNTING BUSHING |