|
|
|
National Stock Number:
5935-00-201-2346
Federal Supply Class:
5935
National Item Identification Number:
002012346
Description:
ADAPTER,CONNECTOR
Detail:
An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and Y-shaped adapters are all ADAPTER, CONNECTOR. Excludes ADAPTER, CONNECTOR TO LAMPBASE; ADAPTER, LAMPHOLDER TO CONNECTOR; ADAPTER (1), CABLE CLAMP TO CONNECTOR; and ADAPTER, LAMPHOLDER. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see ADAPTER (1), ELECTRICAL CONDUIT.
|
Manufacturer Information:
| 716062 | 56232 | LOCKHEED MARTIN CORPORATION | | BNCBNCASP1FF | 71468 | ITT CANNON LLC | | IPC47000 | 74862 | INDUSTRIAL DEVELOPMENT AND MFG CO | | UG414U | 80058 | JOINT ELECTRONICS TYPE DESIGNATION SYSTEM |
|
Techincal Specification:
| BODY STYLE | STRAIGHT SHAPE W/FLANGE | | OVERALL LENGTH | 1.281 INCHES NOMINAL | | OVERALL HEIGHT | 0.688 INCHES NOMINAL | | OVERALL WIDTH | 0.688 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.500 INCHES NOMINAL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.500 INCHES NOMINAL | | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.594 INCHES NOMINAL | | UNTHREADED MOUNTING HOLE DIAMETER | 0.062 INCHES NOMINAL | | CONNECTOR LOCKING METHOD | BAYONET PIN | | THREADED DEVICE TYPE | MOUNTING HOLE | | THREAD SERIES DESIGNATOR | UNEF | | NOMINAL THREAD SIZE | 0.099 INCHES | | THREAD QUANTITY PER INCH | 56 | | NOMINAL THREAD LENGTH | 0.078 INCHES | | SHELL TYPE | SOLID | | SHELL MATERIAL | COPPER ALLOY | | SHELL SURFACE TREATMENT | SILVER | | MATING END QUANTITY | 2 | | CONTACT POSITION ARRANGEMENT STYLE | BNC SINGLE MATING END | | INSERT MATERIAL | PLASTIC ALL MATING ENDS | | INCLUDED CONTACT QUANTITY | 2 ALL MATING ENDS SINGLE CONTACT GROUPING | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT | SILVER SINGLE MATING END SINGLE CONTACT GROUPING | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 74862 | | DESIGN CONTROL REFERENCE | IPC47000 |
|
|