|
|
|
National Stock Number:
5935-00-189-2532
Federal Supply Class:
5935
National Item Identification Number:
001892532
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 457-5878 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 5935007670364 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | M83723/06R1412N | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-26482 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-26482 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 5935007670364 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | MS3474L14-12P | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING | | CONTACT POSITION ARRANGEMENT STYLE | 14-12 SINGLE MATING END | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 4 SINGLE MATING END 1ST CONTACT GROUPING | | 8 SINGLE MATING END 2ND CONTACT GROUPING | | MATING END QUANTITY | 1 | | OVERALL LENGTH | 1.405 INCHES MAXIMUM | | OVERALL DIAMETER | 1.485 INCHES MINIMUM AND | | 1.516 INCHES MAXIMUM | | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.656 INCHES MINIMUM AND | | 0.707 INCHES MAXIMUM | | MOUNTING FACILITY THICKNESS | 0.062 INCHES MINIMUM AND | | 0.187 INCHES MAXIMUM | | BUSHING ACCOMMODATION HOLE SHAPE | ROUND W/FLAT | | CONNECTOR LOCKING METHOD | BAYONET PIN | | THREADED DEVICE TYPE | BACK SHELL AND | | MOUNTING BUSHING | | THREAD SERIES DESIGNATOR | UNEF | | NOMINAL THREAD SIZE | 0.875 INCHES AND | | 1.000 INCHES | | THREAD CLASS | 2A | | THREAD QUANTITY PER INCH | 20 | | THREAD DIRECTION | RIGHT-HAND | | NOMINAL THREAD LENGTH | 0.290 INCHES | | SHELL TYPE | SOLID | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-367,COMP 6061-T6 FED SPEC SINGLE MATERIAL RESPONSE | | SHELL SURFACE TREATMENT | NICKEL | | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY | | INSERT POSITION IN DEG | 0.0 | | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS | | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 600.0 SINGLE MATING END SINGLE CONTACT GROUPING | | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND | | VIBRATION RESISTANT AND | | SALT WATER RESISTANT | | TEST DATA DOCUMENT | 81349-MIL-C-0026482 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-0026482 GOVERNMENT SPECIFICATION | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81349 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-26482 | | MANUFACTURERS CODE | 96906 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS3474L14-12P |
|
|