| NONTURN DEVICE TYPE | TAB AT 3:00 O'CLOCK |
| NONTURN DEVICE RADIUS | 0.375 INCHES NOMINAL AT 3:00 O'CLOCK |
| MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.250 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| TEST DATA DOCUMENT | 81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 180.0 DEGREES FROM CONTACT POSITION 1 1ST ACTUATOR |
| 180.0 DEGREES FROM CONTACT POSITION 1 2ND ACTUATOR |
| OPERATING TEMP RANGE | -65.0 TO 85.0 DEG CELSIUS |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| 28.0 DC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 2.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| 1.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| 100.0 MILLIAMPERES RESISTIVE LOAD DC AT ALTITUDE |
| TERMINAL TYPE | TAB, SOLDER LUG |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 8 1ST ACTUATOR |
| 8 2ND ACTUATOR |
| STYLE DESIGNATOR | TAP, CIRCULAR, BUSHING MOUNT |
| OVERALL LENGTH | 2.153 INCHES MINIMUM AND |
| 2.259 INCHES MAXIMUM |
| OVERALL DIAMETER | 1.000 INCHES MINIMUM AND |
| 1.030 INCHES MAXIMUM |
| INDIVIDUAL SECTION QUANTITY | 2 |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| ROTOR THROUGH CONNECTION QUANTITY | 1 EACH SECTION |
| POLE QUANTITY | 2 EACH SECTION FRONT |
| THROW QUANTITY | 8 EACH SECTION REAR |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 36.0 DEGREES 1ST ACTUATOR |
| 36.0 DEGREES 2ND ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP ALL ACTUATORS |
| SHAFT TYPE | ROUND, HOLLOWED, FLATTED 1ST ACTUATOR |
| ROUND, FLATTED 2ND ACTUATOR |
| FIRST FLAT LENGTH | 0.250 INCHES NOMINAL 1ST ACTUATOR |
| 0.250 INCHES NOMINAL 2ND ACTUATOR |
| FLAT HEIGHT | 0.219 INCHES NOMINAL 1ST ACTUATOR |
| 0.094 INCHES NOMINAL 2ND ACTUATOR |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL 1ST ACTUATOR |
| 0.125 INCHES NOMINAL 2ND ACTUATOR |
| SHAFT LENGTH | 0.625 INCHES NOMINAL 1ST ACTUATOR |
| 1.000 INCHES NOMINAL 2ND ACTUATOR |