|
|
|
National Stock Number:
5915-00-172-1665
Federal Supply Class:
5915
National Item Identification Number:
001721665
Description:
FILTER,RADIO FREQUENCY INTERFERE
Detail:
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
|
Manufacturer Information:
| 1B1 | 26364 | COMPONENTS CORP | | 1JX5101A | 56289 | SPRAGUE ELECTRIC CO WORLD HQS | | APF111L | 00853 | CORNELL-DUBILIER MARKETING INC | | 1VB1 | 05245 | TE CONNECTIVITY CORPORATION | | APF111L | 14655 | CORNELL-DUBILIER ELECTRONICS | | GA1A-1 | 23880 | STANFORD APPLIED ENGINEERING INC |
|
Techincal Specification:
| BODY LENGTH | 1.750 INCHES NOMINAL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.130 INCHES NOMINAL | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG GROUND 3RD FUNCTION | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG INPUT 1ST FUNCTION | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG OUTPUT 2ND FUNCTION | | INCLOSURE TYPE | ENCASED | | LOAD IMPEDANCE PER FUNCTION | 50.0 OHMS BLANK | | OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | 250.0 VOLTS AC BLANK | | OVERALL HEIGHT | 0.630 INCHES NOMINAL | | OVERALL LENGTH | 2.500 INCHES NOMINAL | | OVERALL WIDTH | 1.980 INCHES NOMINAL | | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE | | OPERATING CURRENT RATING PER FUNCTION IN AMPS | 1.0 BLANK | | POWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ | 400.0 BLANK | | SOURCE IMPEDANCE RATING PER FUNCTION | 50.0 OHMS BLANK | | STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES | | UNTHREADED MOUNTING HOLE DIAMETER | 0.188 INCHES NOMINAL |
|
|