|
|
|
National Stock Number:
5910-00-216-4107
Federal Supply Class:
5910
National Item Identification Number:
002164107
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| DPMS2P1 | 14655 | CORNELL-DUBILIER ELECTRONICS | | DPMS4P1 | 14655 | CORNELL-DUBILIER ELECTRONICS | | MFDRC100KP-F | 14752 | ELECTROCUBE, INC. | | MFDRC100KPE | 14752 | ELECTROCUBE, INC. | | PED1-.01-400-10 | 27735 | SOUTHERN ELECTRONICS CO INC |
|
Techincal Specification:
| BODY DIAMETER | 0.530 INCHES NOMINAL | | BODY LENGTH | 1.240 INCHES NOMINAL | | BODY STYLE | W/O MTG FACILITIES, RADIAL TERMINALS | | CAPACITANCE VALUE PER SECTION | 0.100 MICROFARADS SINGLE SECTION | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 1.000 INCHES NOMINAL | | DIELECTRIC MATERIAL | PLASTIC POLYESTER | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 | | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 200.0 MEGOHMS | | INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS | | MATERIAL | PLASTIC CASE | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 400.0 DC SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL DIAMETER | 0.032 INCHES NOMINAL | | TERMINAL HEIGHT FROM BODY | 1.500 INCHES MINIMUM | | TERMINAL LENGTH | 1.500 INCHES MINIMUM | | TERMINAL SURFACE TREATMENT | SOLDER | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION |
|
|