| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 135.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS ALL SECTIONS |
| ACTUATOR TYPE | SINGLE SHAFT |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 ALL SECTIONS |
| BEARING TYPE | BALL SHAFT |
| BODY DIAMETER | 1.656 INCHES MAXIMUM |
| BODY LENGTH | 2.249 INCHES NOMINAL |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| CRITICALITY CODE JUSTIFICATION | CRGD |
| FEATURES PROVIDED | SWITCH |
| FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 ALL SECTIONS |
| LATERAL RUNOUT | 0.002 INCHES |
| OVERALL DIAMETER | 1.734 INCHES MAXIMUM |
| OVERALL LENGTH | 2.999 INCHES NOMINAL |
| MAXIMUM RUNNING TORQUE | 4.00 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES |
| MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 1.6250 INCHES NOMINAL |
| MOUNTING METHOD | CLAMP RING |
| PILOT DIAMETER RUNOUT | 0.0015 INCHES |
| PILOT DIAMETER | 1.3125 INCHES NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 ALL SECTIONS |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 135.0 NOMINAL |
| SECTION QUANTITY | 2 |
| SHAFT END PLAY | 0.004 INCHES |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT LENGTH | 0.750 INCHES NOMINAL |
| SHAFT RADIAL PLAY | 0.002 INCHES |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT STYLE | ROUND |
| SPECIAL FEATURES | SPRING RETURN TO DETENT POSITION |
| SWITCH CONTACT ARRANGEMENT | SINGLE POLE, DOUBLE THROW, THREE POSITIONS MAINTAINED |
| SWITCH CURRENT TYPE AND RATING IN AMPS | 5.000 AC/DC |
| SWITCH OPERATING POSITION | ANY POSITION OF ROTATION TRAVEL |
| SWITCH TYPE | SENSITIVE |
| SWITCH VOLTAGE RATING IN VOLTS | 115.0 |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 10000.0 ALL SECTIONS |
| TAP LOCATION TOLERANCE PER SECTION | -1.5 TO 1.5 OHMS ALL SECTIONS |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -70.0 TO 70.0 ALL SECTIONS |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 8 SOLDER STUD |
| TEST DATA DOCUMENT | 80063-SMA571429 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNDERCUT DIAMETER | 1.500 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |