| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL AND 3595.0 MINIMUM |
| ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS ALL SECTIONS |
| ACTUATOR TYPE | SINGLE SHAFT |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 ALL SECTIONS |
| BEARING TYPE | BALL SHAFT |
| BODY DIAMETER | 0.880 INCHES MAXIMUM |
| BODY LENGTH | 2.916 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| CRITICALITY CODE JUSTIFICATION | CRGD |
| FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 ALL SECTIONS |
| LATERAL RUNOUT | 0.002 INCHES |
| OVERALL DIAMETER | 1.065 INCHES MAXIMUM |
| OVERALL LENGTH | 2.947 INCHES MAXIMUM |
| MAXIMUM RUNNING TORQUE | 1.00 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 1.20 INCH-OUNCES |
| MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL |
| MOUNTING METHOD | CLAMP RING |
| PILOT DIAMETER RUNOUT | 0.0015 INCHES |
| PILOT DIAMETER | 0.6250 INCHES NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3605.0 NOMINAL AND 3610.0 MAXIMUM |
| SECTION QUANTITY | 2 |
| SHAFT END PLAY | 0.005 INCHES |
| SHAFT DIAMETER | 0.1248 INCHES NOMINAL |
| SHAFT RADIAL PLAY | 0.005 INCHES |
| SHAFT LENGTH | 0.500 INCHES NOMINAL |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT STYLE | ROUND |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 1805.0 ALL SECTIONS |
| TAP LOCATION TOLERANCE PER SECTION | -1.0 TO 1.0 OHMS ALL SECTIONS |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -70.0 TO 70.0 ALL SECTIONS |
| TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 8 TURRET |
| TEST DATA DOCUMENT | 18876-10243518 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNDERCUT DIAMETER | 0.781 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |