|
|
|
National Stock Number:
5905-00-224-5072
Federal Supply Class:
5905
National Item Identification Number:
002245072
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| 0730-0161 | 1LQK8 | KEYSIGHT TECHNOLOGIES, INC. | | 0730-0161 | 28480 | HEWLETT-PACKARD COMPANY | | 134212-0001 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 134212-001 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 62D312 | 64537 | CAES SYSTEMS LLC | | 0730-0161 | 7ZXR5 | KEYSIGHT TECHNOLOGIES INC | | 62D312-500HMP0RM1PCT | 64537 | CAES SYSTEMS LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 50.000 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 70.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 160.0 | | BODY DIAMETER | 0.305 INCHES MINIMUM AND 0.317 INCHES MAXIMUM | | BODY LENGTH | 0.050 INCHES MAXIMUM | | CRITICALITY CODE JUSTIFICATION | FEAT | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 1.000 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 | | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL | | STYLE DESIGNATOR | CONCENTRIC TERMINATION PADS | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -300.0/-200.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 160.0 | | TERMINAL WIDTH | 0.031 INCHES NOMINAL | | TEST DATA DOCUMENT | 45413-134212 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|