|
|
|
National Stock Number:
5905-00-189-3145
Federal Supply Class:
5905
National Item Identification Number:
001893145
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 10243512 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 3200-1654-1 | 11534 | BEI SENSORS & SYSTEMS COMPANY, INC. | | 502-0205 | 02111 | VISHAY SPRAGUE INC | | 502-205 | 02111 | VISHAY SPRAGUE INC | | 502-205 | C7407 | IV-ELECTRONIC KLAUS VESPERMANN KG | | 502-0205 | C7407 | IV-ELECTRONIC KLAUS VESPERMANN KG |
|
Techincal Specification:
| SECTION QUANTITY | 2 | | ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS ALL SECTIONS | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS | | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY | | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.05 TO 0.05 ALL SECTIONS | | SHAFT RUNOUT | 0.001 INCHES | | LATERAL RUNOUT | 0.002 INCHES | | PILOT DIAMETER RUNOUT | 0.001 INCHES | | SHAFT RADIAL PLAY | 0.002 INCHES | | SHAFT BEARING TYPE | BALL | | SHAFT END PLAY | 0.005 INCHES | | MAXIMUM STARTING TORQUE | 0.50 INCH-OUNCES | | MAXIMUM RUNNING TORQUE | 0.50 INCH-OUNCES | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -70.0 TO 70.0 ALL SECTIONS | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 55.0 ALL SECTIONS | | FIXED TAP QUANTITY PER SECTION | 1 1ST SECTION | | 4 2ND SECTION | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 1800.0 1ST SECTION | | 1300.0 2ND SECTION AND | | 1800.0 2ND SECTION AND | | 2347.0 2ND SECTION AND | | 2800.0 2ND SECTION | | TAP LOCATION TOLERANCE PER SECTION | -1.0 TO 1.0 DEG ANGULAR ROTATION ALL SECTIONS | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | PILOT DIAMETER | 0.7500 INCHES NOMINAL | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.781 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL | | BODY DIAMETER | 0.880 INCHES MAXIMUM | | BODY LENGTH | 3.250 INCHES MAXIMUM | | MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL | | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND | | SHAFT DIAMETER | 0.1248 INCHES NOMINAL | | SHAFT LENGTH | 0.500 INCHES NOMINAL | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL | | MOUNTING METHOD | CLAMP RING | | TERMINAL TYPE AND QUANTITY | 11 TURRET | | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SPECIAL FEATURES | REAR 0.062 IN. BY 0.040 IN. SLOTTED SHAFT RECESSED IN CASE | | TEST DATA DOCUMENT | 18876-10243512 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | OVERALL LENGTH | 3.781 INCHES MAXIMUM | | OVERALL DIAMETER | 1.065 INCHES MAXIMUM | | FRAGILITY FACTOR | MODERATELY RUGGED | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 18876 | | DESIGN CONTROL REFERENCE | 10243512 |
|
|