|
|
|
National Stock Number:
5905-00-177-7342
Federal Supply Class:
5905
National Item Identification Number:
001777342
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 10179966 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 200FTS146 | 08815 | HONEYWELL INTERNATIONAL INC | | 62106 | 10112 | GENERAL DYNAMICS MOTION CONTROL LLC |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 357.0 MINIMUM | | ELECTRICAL RESISTANCE PER SECTION | 10.000 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 80.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION | | BODY DIAMETER | 1.437 INCHES NOMINAL | | BODY LENGTH | 1.020 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | LATERAL RUNOUT | 0.002 INCHES | | OVERALL DIAMETER | 2.005 INCHES MAXIMUM | | OVERALL LENGTH | 1.582 INCHES MAXIMUM | | MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.06200 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 1.99750 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING | | PILOT DIAMETER RUNOUT | 0.00100 INCHES | | PILOT DIAMETER | 1.87450 INCHES NOMINAL | | PILOT LENGTH | 0.06200 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM | | SHAFT RADIAL PLAY | 0.003 INCHES | | SHAFT LENGTH | 0.562 INCHES NOMINAL | | SHAFT RUNOUT | 0.001 INCHES | | SHAFT STYLE | ROUND | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 5000.0 SINGLE SECTION | | TAP LOCATION TOLERANCE PER SECTION | -0.5 TO 0.5 OHMS SINGLE SECTION | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -400.0 TO 400.0 SINGLE SECTION | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TEST DATA DOCUMENT | 18876-10179966 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT DIAMETER | 1.87500 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.07300 INCHES MINIMUM |
|
|