|
|
|
National Stock Number:
5365-00-222-0119
Federal Supply Class:
5365
National Item Identification Number:
002220119
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 171214-1 | 24930 | L3HARRIS TECHNOLOGIES, INC |
|
Techincal Specification:
| CONSTRUCTION | LAMINATED | | FEATURES PROVIDED | SEPARABLE | | LAMINATION QUANTITY | 18 OR 20 AND 1 | | LAMINATION THICKNESS | 0.002 INCHES NOMINAL AND 0.032 INCHES NOMINAL | | OVERALL LENGTH | 1.000 INCHES NOMINAL | | OVERALL WIDTH | 0.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 | | SPECIAL FEATURES | TWO 0.140 W BY 0.320 IN. D SLOTS ALONG LENGTH 0NE EACH SIDE,FIRST SLOT 0.220 IN. FROM END AND 0.562 IN. APART | | STYLE DESIGNATOR | RECTANGULAR |
|
|