|
|
|
National Stock Number:
5340-00-229-4361
Federal Supply Class:
5340
National Item Identification Number:
002294361
Description:
HINGE,BUTT
Detail:
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
|
Manufacturer Information:
| A156.1 A2112 | 80204 | AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED | | BHMA-A156.1 | 41280 | BUILDERS HARDWARE MFRS ASSN INC | | BHMA-A156.1 A2112 4-1/2IN | 41280 | BUILDERS HARDWARE MFRS ASSN INC | | FFH116 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| PIN REMOVABILITY | NONREMOVABLE | | REVERSIBLE FEATURE | NOT INCLUDED | | KNUCKLE QUANTITY | 2 OR | | 5 | | PERFORMANCE TYPE | REGULAR DUTY | | MATERIAL AND LOCATION | BRONZE, WROUGHT BODY AND | | BRONZE, WROUGHT BUTTON TIP AND | | STEEL, CORROSION RESISTING PIN AND | | STEEL BALL BEARING | | STYLE DESIGNATOR | BUTT | | SURFACE TREATMENT AND LOCATION | LACQUER BODY AND | | LACQUER BUTTON TIP | | MATERIAL THICKNESS | 0.134 INCHES NOMINAL | | MOUNTING HOLE DIAMETER | 0.221 INCHES NOMINAL | | BODY WIDTH | 4.500 INCHES NOMINAL | | PIN CENTER TO BODY EDGE DISTANCE | 2.250 INCHES NOMINAL | | PIN TIP STYLE | FLAT BUTTON | | HINGE MOUNTING TYPE | FULL MORTISE | | KNUCKLE TYPE | BALL BEARING OR | | FRICTION | | MOUNTING HOLE QUANTITY | 8 | | NONDEFINITIVE SPEC/STD DATA | 2102 TYPE |
|
|