| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.410 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.720 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.880 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.650 INCHES MINIMUM AND 0.710 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.134 INCHES MINIMUM AND 0.142 INCHES MAXIMUM |
| FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.590 INCHES MINIMUM AND 1.650 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AQQ-S-766 COND A FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 304 |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.880 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.410 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.134 INCHES MINIMUM AND 0.142 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.720 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.590 INCHES MINIMUM AND 1.650 INCHES MAXIMUM |
| SECOND LEG LENGTH | 2.590 INCHES MINIMUM AND 2.650 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |