| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.380 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.281 INCHES MINIMUM AND 0.297 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 4.370 INCHES MINIMUM AND 4.380 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.130 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.380 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| FIRST LEG WIDTH | 5.120 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.250 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 4.370 INCHES MINIMUM AND 4.380 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.380 INCHES NOMINAL |
| SECOND LEG CORNER RADIUS | 0.380 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 7.870 INCHES MINIMUM AND 7.880 INCHES MAXIMUM |
| SECOND LEG LENGTH | 9.250 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 0.281 INCHES MINIMUM AND 0.297 INCHES MAXIMUM |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| SECOND LEG WIDTH | 5.120 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |