| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.562 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 7.500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.000 INCHES NOMINAL |
| FIRST LEG WIDTH | 9.500 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.250 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-741 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.000 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 6.000 INCHES NOMINAL |
| SECOND LEG LENGTH | 8.750 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 3.500 INCHES NOMINAL |
| SECOND LEG END WIDTH | 5.500 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 0.688 INCHES NOMINAL |
| SECOND LEG STYLE | SQUARE AND TAPERED |
| SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| SECOND LEG WIDTH | 9.500 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-E-52798 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-E-52835 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ENAMEL |