|
|
|
National Stock Number:
5330-00-208-2264
Federal Supply Class:
5330
National Item Identification Number:
002082264
Description:
SEAL,NONMETALLIC STRIP
Detail:
An item fabricated from nonmetallic material designed to be used where there is no relative motion between joined parts. Items having a square or rectangular cross section must be a single piece whose ends may have been secured together to form a specific shape. It may be formed to a specific shape, except round, with or without joints. It may have fabric, cord or metal reinforcement. Except for molded corners, end cuts, and mounting facilities such as holes, slots, press-fit buttons, or the like, the item must be of one continuous cross section. For straight items with square end cuts and without mounting holes, slots or press-fit buttons see RUBBER STRIP. For items with round cross sections see SEAL, NONMETALLIC ROUND SECTION. Excludes GASKET and PACKING, PREFORMED.
|
Manufacturer Information:
| 575415-3 | 22525 | INSTRUMENTS AND FLIGHT RESEARCH INC. | | 575415-3 | 94271 | LOCKHEED MARTIN CORP | | 575415-3 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 913787PC44 | 22525 | INSTRUMENTS AND FLIGHT RESEARCH INC. |
|
Techincal Specification:
| ATTACHMENT FEATURE CENTER TO CENTER DISTANCE ALONG LENGTH | 3.188 INCHES NOMINAL | | ATTACHMENT FEATURE QUANTITY | 5 | | ATTACHMENT HOLE DIAMETER | 0.312 INCHES NOMINAL | | ATTACHMENT METHOD | ROUND HOLE | | CONSTRUCTION | SOLID | | CRITICALITY CODE JUSTIFICATION | ZZZY | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | CROSS-SECTIONAL HEIGHT | 0.812 INCHES NOMINAL | | CROSS-SECTIONAL WIDTH | 0.125 INCHES NOMINAL | | FABRICATION METHOD | SOLID | | OVERALL LENGTH | 17.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-1149 CL 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | RUBBER CHLOROPRENE CLASS CR OVERALL | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY PACKAGING WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS | | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING | | STYLE DESIGNATOR | STRIP | | TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|