|
|
|
National Stock Number:
5320-00-188-1578
Federal Supply Class:
5320
National Item Identification Number:
001881578
Description:
RIVET,BLIND
Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.
|
Manufacturer Information:
| CDR-9301-MS-5-12 | 05693 | CHERRY TEXTRON INC CHERRY COMMERCIAL FASTENERS PRODUCTS DIV OF TEXTRON INC | | CDR-9301-MS-5-12 | 11815 | SPS TECHNOLOGIES, LLC | | MS24662-47 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS24662-47 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| HEAD STYLE | UNIVERSAL | | SHANK STYLE | DRIVE PIN | | MATERIAL | STEEL COMP 301 OR | | STEEL COMP 302 OR | | STEEL COMP 303S OR | | STEEL COMP 303 OR | | STEEL COMP 303SE OR | | STEEL COMP 304 OR | | STEEL COMP 304L OR | | STEEL COMP 305 OR | | STEEL COMP 308 OR | | STEEL COMP 309 OR | | STEEL COMP 309S OR | | STEEL COMP 310 OR | | STEEL COMP 310S OR | | STEEL COMP 314 OR | | STEEL COMP 316 OR | | STEEL COMP 316L OR | | STEEL COMP 317 OR | | STEEL COMP 321 OR | | STEEL COMP 347 OR | | STEEL COMP 348 OR | | STEEL COMP 303F OR | | STEEL COMP 385 STEM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE BODY | | 66 FED STD ALL MATERIAL RESPONSES STEM | | SURFACE TREATMENT | ANODIZE OR | | CHROMATE BODY | | PASSIVATE STEM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR | | MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE BODY | | HEAD HEIGHT | 0.067 INCHES MINIMUM AND | | 0.077 INCHES MAXIMUM | | HEAD MAJOR DIAMETER | 0.296 INCHES MINIMUM AND | | 0.328 INCHES MAXIMUM | | FASTENER LENGTH | 0.490 INCHES MINIMUM AND | | 0.530 INCHES MAXIMUM | | SHANK DIAMETER | 0.154 INCHES MINIMUM AND | | 0.158 INCHES MAXIMUM | | GRIP LENGTH | 0.360 INCHES MINIMUM AND | | 0.390 INCHES MAXIMUM | | EXPANSION DEVICE | DRIVE STEM-TYPE H |
|
|