|
|
|
National Stock Number:
5320-00-188-1245
Federal Supply Class:
5320
National Item Identification Number:
001881245
Description:
RIVET,BLIND
Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.
|
Manufacturer Information:
| 0SB100-T06-13 | 0HDW7 | HUCK INTERNATIONAL, INC. | | 0SB100-T06-13 | 17446 | HUCK INTERNATIONAL, INC | | OSB100-T06-13 | 0HDW7 | HUCK INTERNATIONAL, INC. | | CR7340S06-13 | 11815 | SPS TECHNOLOGIES, LLC | | 0SB100-T06-13 | 29666 | HUCK MFG CO | | C9502-06-13 | 81755 | LOCKHEED MARTIN CORPORATION | | OSB100-T06-13 | 17446 | HUCK INTERNATIONAL, INC | | OSB100-T06-13 | 29666 | HUCK MFG CO |
|
Techincal Specification:
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) | | SHANK STYLE | SELF-PLUGGING MECHANICALLY LOCKED STEM | | MATERIAL | STEEL COMP 4027 OR | | STEEL COMP 8740 OR | | STEEL COMP 4037 SLEEVE | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-405 FED SPEC 1ST MATERIAL RESPONSE OR | | AISI ASSN STD 1ST MATERIAL RESPONSE OR | | ASTM A547 ASSN STD 2ND MATERIAL RESPONSE BOLT | | QQ-S-405 FED SPEC 1ST MATERIAL RESPONSE OR | | ASTM A547 ASSN STD 2ND MATERIAL RESPONSE NUT | | ASTM A547 ASSN STD 2ND MATERIAL RESPONSE SLEEVE | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE BOLT | | CHROMATE NUT | | CADMIUM AND | | CHROMATE SLEEVE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE BOLT | | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE NUT | | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE | | SHEAR STRENGTH | 3450 SINGLE POUNDS PER SQUARE INCH | | HEAD MAJOR DIAMETER | 0.386 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.990 INCHES MAXIMUM | | SHANK DIAMETER | 0.213 INCHES MINIMUM AND | | 0.215 INCHES MAXIMUM | | GRIP LENGTH | 0.781 INCHES MINIMUM AND | | 0.845 INCHES MAXIMUM | | EXPANSION DEVICE | SERRATED STEM-TYPE W | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 0HDW7 | | DESIGN CONTROL REFERENCE | OSB100-T06-13 |
|
|