|
|
|
National Stock Number:
5310-00-225-8327
Federal Supply Class:
5310
National Item Identification Number:
002258327
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 10388961 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 12Z10001-809 | 94135 | NAVAL ORDNANCE STANDARDS | | K59-0010 | 63743 | WARD LEONARD CT LLC | | MS19068-092 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 5310002258327 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5310002258327 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| DRIVE POINT DEPTH | 0.094 INCHES NOMINAL | | DRIVE POINT QUANTITY | 4 | | DRIVE POINT WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | HARDNESS RATING | 66.0 ROCKWELL B MINIMUM AND 92.0 ROCKWELL B MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OVERALL | | NOMINAL THREAD SIZE | 1.767 INCHES | | NUT DIAMETER | 2.511 INCHES MINIMUM AND 2.541 INCHES MAXIMUM | | NUT THICKNESS | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM | | NUT STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS C FED SPEC 1ST TREATMENT RESPONSE AND QQ-Z-325,TYPE 2,CLASS 3 FED SPEC 3RD TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OR ZINC OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD PITCH DIAMETERS | +1.7309 TO 1.7354 INCHES | | THREAD SERIES | UNS | | THREAD QUANTITY PER INCH | 18 |
|
|