|
|
|
National Stock Number:
5310-00-225-8309
Federal Supply Class:
5310
National Item Identification Number:
002258309
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 12-Z-335-203 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 12Z335-203 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 711067 | 21450 | ARMY WEAPONS COMMAND ATTN AMSWE-REE-S | | N02ZINCC0ATED | 79568 | WHITTET-HIGGINS COMPANY | | BACN10AP02 | 81205 | THE BOEING COMPANY | | MS19068-022 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | TN02 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| DRIVE POINT DEPTH | 0.094 INCHES NOMINAL | | DRIVE POINT QUANTITY | 4 | | DRIVE POINT WIDTH | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | HARDNESS RATING | 66.0 ROCKWELL B MINIMUM AND 92.0 ROCKWELL B MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OVERALL | | NOMINAL THREAD SIZE | 0.586 INCHES | | NUT DIAMETER | 0.980 INCHES MINIMUM AND 1.010 INCHES MAXIMUM | | NUT THICKNESS | 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM | | NUT STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS C FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TYPE 2,CLASS 3 FED SPEC 3RD TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OR ZINC OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD PITCH DIAMETERS | +0.5657 TO 0.5687 INCHES | | THREAD SERIES | UNS | | THREAD QUANTITY PER INCH | 32 |
|
|