|
|
|
National Stock Number:
5310-00-221-7457
Federal Supply Class:
5310
National Item Identification Number:
002217457
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 9689M14P01 | 07482 | GENERAL ELECTRIC COMPANY | | 9689M14P01 | 15653 | HOWMET GLOBAL FASTENING SYSTEMS INC | | K19001-4 | 15653 | HOWMET GLOBAL FASTENING SYSTEMS INC | | K19001-4 | 75237 | HOWMET GLOBAL FASTENING SYSTEMS INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HEAT TREATMENT | AS FABRICATED | | HOLE DIAMETER | 0.311 INCHES MINIMUM AND 0.316 INCHES MAXIMUM | | OVERALL DIAMETER | 0.447 INCHES MINIMUM AND 0.453 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5085 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1050 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.081 INCHES MINIMUM AND 0.091 INCHES MAXIMUM |
|
|