|
|
|
National Stock Number:
5310-00-215-7624
Federal Supply Class:
5310
National Item Identification Number:
002157624
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 1N6-17 | 43999 | THE BOEING COMPANY | | 1N6-17 | 88313 | CRESTA BLANCA WINE CO INC |
|
Techincal Specification:
| DRIVE POINT QUANTITY | 2 | | DRIVE POINT WIDTH | 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM | | DRILLED HOLE DIAMETER | 0.070 INCHES NOMINAL | | DRIVE POINT DEPTH | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | COUNTERBORE DIAMETER | 1.0024 INCHES MINIMUM AND 1.0105 INCHES MAXIMUM NUT | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 2 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/2 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/4 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/3 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-225/6 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-225/5 FED SPEC 3RD MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 2017 OVERALL | | NOMINAL THREAD SIZE | 1.062 INCHES | | NUT DIAMETER | 1.547 INCHES MINIMUM AND 1.577 INCHES MAXIMUM | | NUT STYLE | ROUND | | NUT THICKNESS | 0.250 INCHES MINIMUM AND 0.280 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-A-696 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES | UNEF |
|
|