|
|
|
National Stock Number:
5310-00-209-2502
Federal Supply Class:
5310
National Item Identification Number:
002092502
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 342930-3 | 17772 | AERO ENGINEERING & MANUFACTURING COMPANY OF CALIFORNIA, LLC | | 342930-3 | 1WL60 | LOCKHEED MARTIN SERVICES, LLC | | MILW45595 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 342930-3 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8630 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6050 COND F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 25.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.378 INCHES MINIMUM AND | | 0.388 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.812 INCHES NOMINAL | | RECESS DIAMETER | 0.483 INCHES MINIMUM AND | | 0.495 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.100 INCHES MINIMUM AND | | 0.110 INCHES MAXIMUM | | RECESS ANGLE | 90.0 DEGREES NOMINAL | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81349 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MILW45595 | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 1WL60 | | DESIGN CONTROL REFERENCE | 342930-3 |
|
|