|
|
|
National Stock Number:
5310-00-209-0755
Federal Supply Class:
5310
National Item Identification Number:
002090755
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 1001171-2 | 07421 | L3HARRIS INTERSTATE ELECTRONICS CORPORATION | | 5310002090755 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 7607632 | 19200 | US ARMY ARDEC RDECOM | | MS35338-115 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS35338-115 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 5310002090755 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| MATERIAL | NICKEL ALLOY OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286,CL A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND | | 40.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND | | HOLE DIAMETER | 0.088 INCHES MINIMUM AND | | 0.094 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.172 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.020 INCHES MINIMUM AND | | 0.026 INCHES MAXIMUM | | MINIMUM TENSILE STRENGTH | 155000 POUNDS PER SQUARE INCH |
|