|
|
|
National Stock Number:
5310-00-208-9699
Federal Supply Class:
5310
National Item Identification Number:
002089699
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 47-645-083-1 | 80070 | LOCKHEED MARTIN CORPORATION | | 47-645-083-1 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| THREAD SERIES | UN | | NOMINAL THREAD SIZE | 0.875 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COND C MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | NUT STYLE | ROUND | | DRIVE POINT DEPTH | 0.092 INCHES MINIMUM AND | | 0.097 INCHES MAXIMUM | | NUT DIAMETER | 1.547 INCHES MINIMUM AND | | 1.567 INCHES MAXIMUM | | NUT THICKNESS | 0.365 INCHES MINIMUM AND | | 0.385 INCHES MAXIMUM | | DRIVE POINT WIDTH | 0.177 INCHES MINIMUM AND | | 0.197 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 4 | | COUNTERSINK ANGLE | 89.5 DEGREES MINIMUM AND | | 90.5 DEGREES MAXIMUM NUT | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 97499 | | DESIGN CONTROL REFERENCE | 47-645-083-1 |
|
|