|
|
|
National Stock Number:
5310-00-208-4396
Federal Supply Class:
5310
National Item Identification Number:
002084396
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 7599295 | 19200 | US ARMY ARDEC RDECOM | | A11260-2 | 37942 | YOSEMITE INVESTMENT INC DBA NORTH AMERICAN CAPACITOR CO |
|
Techincal Specification:
| COUNTERSINK ANGLE | 88.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM NUT | | CROSS-SECTIONAL SHAPE | HEXAGONAL FLANGE | | CROSS-SECTIONAL SHAPE | ROUND NUT | | FLANGE THICKNESS | 0.104 INCHES MINIMUM AND 0.114 INCHES MAXIMUM | | FLANGE WIDTH ACROSS FLATS | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY 360 OVERALL | | NOMINAL THREAD SIZE | 0.375 INCHES | | NUT DIAMETER | 0.419 INCHES MINIMUM AND 0.423 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | NUT LENGTH | 0.464 INCHES MINIMUM AND 0.474 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-12011,FINISH 21.06,TYPE KS FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | NICKEL OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES | UNEF |
|
|