|
|
|
National Stock Number:
5310-00-208-3747
Federal Supply Class:
5310
National Item Identification Number:
002083747
Description:
NUT,PLAIN,HEXAGON
Detail:
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 10116674 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 2210259 | 001JK | EMBRAER S.A. DBA EMBRAER | | 2210259 | S4956 | EMBRAER EMPRESA BRASILEIRA DE AERONAUTICA SA | | 5310PL0145234 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 752 523 | 77294 | PIPER INDUSTRIAL MANUFACTURING COMPANY, LLC | | FF-N-836 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | NAS509-7 | 3H464 | BOLLHOFF INC. | | NAS509-7 | 63035 | LONG-LOK FASTENERS CORPORATION | | NAS509-7 | 78022 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | NAS509-7 | 78286 | SIKORSKY AIRCRAFT CORPORATION | | NAS509-7 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NAS509-7 | 92595 | NELSON STUD WELDING, INC | | NAS509-7 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | Z00.N5328158463 | F0086 | SOCATA |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.045 INCHES MINIMUM AND 0.050 INCHES MAXIMUM | | BEARING SURFACE FINISH | 125.0 MICROINCHES | | BEARING SURFACE TYPE | CHAMFERED | | COUNTERSINK ANGLE | 110.0 DEGREES NOMINAL BOTH ENDS | | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION B | | HOLE TYPE AND QUANTITY | 3 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,CONDITION F-4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OVERALL | | NOMINAL THREAD SIZE | 0.438 INCHES | | NUT HEIGHT | 0.281 INCHES NOMINAL | | NUT STYLE | HEXAGON | | SPECIFICATION/STANDARD DATA | 80205-NAS509 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD | | WIDTH ACROSS FLATS | 0.615 INCHES MINIMUM AND 0.627 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 20 | | THREAD SERIES | UNJF |
|
|