| DISTANCE FROM MOUNTING HOLE CENTER TO BASE | 0.454 INCHES MINIMUM AND 0.484 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM |
| DISTANCE FROM BASE TO CENTER OF APERTURE | 0.266 INCHES MINIMUM AND 0.296 INCHES MAXIMUM |
| FEATURES PROVIDED | FLOATING NUT |
| LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE NUT |
| MATERIAL | ALUMINUM ALLOY SHELL |
| MATERIAL | PLASTIC POLYAMIDE LOCKING INSERT |
| MATERIAL | STEEL COMP 1212 NUT |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| NOMINAL THREAD SIZE | 0.164 INCHES |
| NUT HEIGHT | 0.313 INCHES MINIMUM AND 0.343 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| NUT STYLE | PLATE |
| NUT LENGTH | 0.844 INCHES MINIMUM AND 0.874 INCHES MAXIMUM |
| PLATE THICKNESS | 0.035 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| PLATE WIDTH | 0.391 INCHES MINIMUM AND 0.421 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-A-8625 MIL SPEC 2ND TREATMENT RESPONSE SHELL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 1 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT | OXIDE FILM OR ANODIZE SHELL |
| SURFACE TREATMENT | CADMIUM NUT |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES | UNC |