| DISTANCE FROM MOUNTING HOLE CENTER TO BASE | 0.469 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.247 INCHES MINIMUM AND 0.253 INCHES MAXIMUM |
| DISTANCE FROM BASE TO CENTER OF APERTURE | 0.266 INCHES MINIMUM AND 0.296 INCHES MAXIMUM |
| LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5010 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200 TEMPER T5 FED SPEC SINGLE MATERIAL RESPONSE SHELL |
| MATERIAL | STEEL COMP 1212 NUT |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| NUT HEIGHT | 0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| NUT STYLE | PLATE |
| NUT LENGTH | 0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM |
| PLATE THICKNESS | 0.072 INCHES MAXIMUM |
| PLATE WIDTH | 0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE SHELL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT | ANODIZE SHELL |
| SURFACE TREATMENT | CADMIUM NUT |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES | UNF |