| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059,COND A/A MIL SPEC SINGLE MATERIAL RESPONSE BASE |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059,COND A/A MIL SPEC SINGLE MATERIAL RESPONSE SHELL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720,COND AA MIL SPEC ALL MATERIAL RESPONSES NUT |
| MATERIAL | STEEL COMP 302 BASE |
| MATERIAL | STEEL COMP 302 SHELL |
| MATERIAL | STEEL COMP 303S OR STEEL COMP 303SE NUT |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| MOUNTING PROVISION LOCATION | NUT PROJECTION SIDE |
| NOMINAL THREAD SIZE | 0.164 INCHES |
| NUT HEIGHT | 0.229 INCHES NOMINAL |
| NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| NUT STYLE | PLATE |
| NUT LENGTH | 0.969 INCHES NOMINAL |
| PLATE THICKNESS | 0.035 INCHES NOMINAL |
| PLATE WIDTH | 0.391 INCHES NOMINAL |
| PRECIOUS MATERIAL AND LOCATION | NUT SILVER |
| PRECIOUS MATERIAL | SILVER |
| SURFACE TREATMENT | SILVER NUT |
| SURFACE TREATMENT | PASSIVATE SHELL |
| TEMP RATING | 800.0 FAHRENHEIT NOMINAL |
| THREAD CLASS | 2B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES | UNC |