5365-00-205-9924 SHIM Index 5365-00-205-9926 SHIM

National Stock Number:
5310-00-205-9925

Federal Supply Class:
5310

National Item Identification Number:
002059925

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
2231414D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
FF-N-83681348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
WMS2157-9X01843AMBAC INTERNATIONAL CORPORATION
WMS2157-9X7PZX0FAIRBANKS MORSE, LLC
WMS2157-9X82796COLTEC INDUSTRIES INC DBA FAIRBANKS MORSE ENGINE DIV FAIRBANKS MORSE ENGINE
WMS2157/9XD9182ZF INDUSTRIEANTRIEBE WITTEN GMBH


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.251 INCHES NOMINAL
OVERALL DIAMETER0.551 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 1095 OVERALL
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.020 INCHES NOMINAL


Click here to Register for Free 30-day Trial