5365-00-205-9547 SHIM Index 5365-00-205-9549 SHIM

National Stock Number:
5310-00-205-9548

Federal Supply Class:
5310

National Item Identification Number:
002059548

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
2W1C6-7-2043999THE BOEING COMPANY
73045419315HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS
73045499251MISSION SYSTEMS DAVENPORT INC.
730454-119315HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS
730454-199251MISSION SYSTEMS DAVENPORT INC.


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.094 INCHES NOMINAL
OVERALL DIAMETER0.218 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
PERIPHERAL SHAPE STYLEROUND
SPECIFICATION/STANDARD DATA43999-2W1 MANUFACTURERS STANDARD
THICKNESS0.020 INCHES NOMINAL


Click here to Register for Free 30-day Trial