5905-00-205-9422 RESISTOR,FIXED,FILM Index 5905-00-205-9426 RESISTOR,FIXED,FILM

National Stock Number:
5310-00-205-9424

Federal Supply Class:
5310

National Item Identification Number:
002059424

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
174S1013002GOODRICH CORPORATION
174S1017576GOODRICH CORP DBA GOODRICH CORP
174S1055284HONEYWELL INTERNATIONAL INC.
174S106K4C8GOODRICH CORPORATION
GKT210393232CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION
GKT2103D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.628 INCHES MINIMUM AND 0.633 INCHES MAXIMUM
OVERALL DIAMETER0.875 INCHES NOMINAL
MATERIALCOPPER OVERALL
PERIPHERAL SHAPE STYLEROUND
SURFACE TREATMENTTIN OVERALL
THICKNESS0.032 INCHES NOMINAL


Click here to Register for Free 30-day Trial