5310-00-205-9251 WASHER,FLAT Index 5310-00-205-9257 WASHER,FLAT

National Stock Number:
5310-00-205-9252

Federal Supply Class:
5310

National Item Identification Number:
002059252

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
2433W098U1605HONEYWELL AEROSPACE YEOVIL
SWBC0606-01YR19315HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS
SWBC0606-01YR55972HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS
SWBC0606-01YR99251MISSION SYSTEMS DAVENPORT INC.


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
OVERALL DIAMETER0.182 INCHES MINIMUM AND 0.187 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4610 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALCOPPER ALLOY 360 OVERALL
PERIPHERAL SHAPE STYLEROUND
SURFACE TREATMENTCADMIUM OVERALL
THICKNESS0.011 INCHES MINIMUM AND 0.021 INCHES MAXIMUM


Click here to Register for Free 30-day Trial