5905-00-205-9141 RESISTOR,FIXED,FILM Index 5310-00-205-9148 WASHER,FLAT

National Stock Number:
5310-00-205-9147

Federal Supply Class:
5310

National Item Identification Number:
002059147

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
849578824446GENERAL ELECTRIC COMPANY
849578881893GENERAL ELECTRIC CO LYNN RIVER WORKS


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HARDNESS RATING52.0 ROCKWELL SUPERFICIAL 15-T MINIMUM OR 64.0 ROCKWELL SUPERFICIAL 15-T MAXIMUM
HOLE DIAMETER1.030 INCHES MINIMUM AND 1.040 INCHES MAXIMUM
OVERALL DIAMETER1.500 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5042 ASSN STD 1ST MATERIAL RESPONSE AND BSA4,FSCM 24446 MFR REF 2ND MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 1010 OR STEEL OVERALL
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.0207 INCHES MINIMUM AND 0.035 INCHES MAXIMUM


Click here to Register for Free 30-day Trial