5330-00-197-9341 GASKET Index 5307-00-197-9355 STUD,SPECIAL

National Stock Number:
5310-00-197-9342

Federal Supply Class:
5310

National Item Identification Number:
001979342

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
571-3801-1302150REVAPC3880064NAVAL SHIP SYSTEMS COMMAND
571-3801-1302150REVBPC3880064NAVAL SHIP SYSTEMS COMMAND
571-4501-1303264REVAPC2080064NAVAL SHIP SYSTEMS COMMAND
572-4800-1415694ALTAPC1280064NAVAL SHIP SYSTEMS COMMAND
572-4801-1416839ALTAPC1280064NAVAL SHIP SYSTEMS COMMAND
572-4805-1415743ALTAPC1880064NAVAL SHIP SYSTEMS COMMAND
572-4824-1415714ALTAPC2480064NAVAL SHIP SYSTEMS COMMAND
574-4105-812207REVBPC1280064NAVAL SHIP SYSTEMS COMMAND
574-4801-812005REVAPC1880064NAVAL SHIP SYSTEMS COMMAND
574-5500-812148REVAPC4480064NAVAL SHIP SYSTEMS COMMAND
574-5500-812148REVAPC7380064NAVAL SHIP SYSTEMS COMMAND
575-0103-1443626REVBPC6230-2580064NAVAL SHIP SYSTEMS COMMAND
575-3801-1443822REVAPC2880064NAVAL SHIP SYSTEMS COMMAND
575-4501-1442919REVAPC2280064NAVAL SHIP SYSTEMS COMMAND
575-4700-1444246PC3880064NAVAL SHIP SYSTEMS COMMAND
912257724617GENERAL MOTORS CORP
912257797907TEREX CORP
K3742D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.438 INCHES NOMINAL
OVERALL DIAMETER0.875 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-C-16090 CL 2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALCORK OVERALL
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.125 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us