|
|
|
National Stock Number:
5310-00-188-4185
Federal Supply Class:
5310
National Item Identification Number:
001884185
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 28003 | 29201 | JOHN DEER CONSUMER PRODUCTS INC | | 3219 | 79575 | WICO-PRESTOLITE CO THE DIV OF ELTRA CORP | | 7402857 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | A11574 | 46522 | DCM MANUFACTURING, INC. | | 3219F | 79575 | WICO-PRESTOLITE CO THE DIV OF ELTRA CORP |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1010 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ZINC OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.187 INCHES MINIMUM AND | | 0.190 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.308 INCHES MINIMUM AND | | 0.318 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.017 INCHES MINIMUM AND | | 0.022 INCHES MAXIMUM | | HARDNESS RATING | 85.5 ROCKWELL B NOMINAL |
|
|