|
|
|
National Stock Number:
5310-00-187-7318
Federal Supply Class:
5310
National Item Identification Number:
001877318
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 4F50265-105A | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | S30000,FINISH C,CLASS 2,TYPE 2 FSCM 98897 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.284 INCHES MINIMUM AND | | 0.294 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.531 INCHES NOMINAL | | RECESS DIAMETER | 0.334 INCHES MINIMUM AND | | 0.344 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.045 INCHES NOMINAL | | RECESS ANGLE | 88.0 DEGREES MINIMUM AND | | 92.0 DEGREES MAXIMUM | | MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 98897 | | DESIGN CONTROL REFERENCE | 4F50265-105A |
|
|