|
|
|
National Stock Number:
5310-00-187-2450
Federal Supply Class:
5310
National Item Identification Number:
001872450
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| MS21307-3 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1010 OR | | STEEL COMP 1011 OR | | STEEL COMP 1012 OR | | STEEL COMP 1013 OR | | STEEL COMP 1015 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ZINC OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-Z-17871,HOT DIPPED MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.802 INCHES MINIMUM AND | | 0.822 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | SQUARE | | WIDTH ACROSS FLATS | 2.250 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.188 INCHES NOMINAL | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 96906 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS21307-3 |
|
|