|
|
|
National Stock Number:
5310-00-176-8138
Federal Supply Class:
5310
National Item Identification Number:
001768138
Description:
NUT,PLAIN,HEXAGON
Detail:
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 10-90405-5 | 59501 | UNISON INDUSTRIES LLC | | 10-90405-5 | 77820 | AMPHENOL CORP | | 10-92873-302 | 22787 | PRECISION AEROSPACE CORPORATION DBA PRECISION ENGINE CONTROL | | 25112 | 99167 | HAMILTON SUNDSTRAND CORPORATION | | 10195440 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 5310-176-8138 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 901834K1 | 06848 | HONEYWELL INTERNATIONAL INC | | 8528197 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 901834K1 | 2A659 | AIRMOTIVE CARBURETOR | | A1639-11 | 76275 | CESSNA AIRCRAFT CO MCCAULEY ACCESSORY DIV | | FF-N-836 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | AN345-10 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | AN345-10 | K6214 | KEARSLEY AIRWAYS LIMITED | | 5310001768138 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | HNW-563 | 08289 | THE DELBERT BLINN CO INC |
|
Techincal Specification:
| BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED | | COUNTERSINK ANGLE | 110.0 DEGREES NOMINAL NUT | | MATERIAL | STEEL OVERALL | | NOMINAL THREAD SIZE | 0.190 INCHES | | NUT HEIGHT | 0.117 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | NUT STYLE | HEXAGON | | WIDTH ACROSS FLATS | 0.362 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNF | | THREAD QUANTITY PER INCH | 32 |
|
|