|
|
|
National Stock Number:
5307-00-208-6309
Federal Supply Class:
5307
National Item Identification Number:
002086309
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 47-130-114-13 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| MATERIAL | STEEL | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 0.859 INCHES MINIMUM AND | | 0.906 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | 0.375 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 24 STUD THREAD | | THREAD PITCH DIAMETERS | 0.3498 TO 0.3512 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.640 INCHES MAXIMUM NUT THREAD | | 0.437 INCHES MAXIMUM STUD THREAD | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.203 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.106 INCHES NOMINAL FIRST HOLE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 97499 | | DESIGN CONTROL REFERENCE | 47-130-114-13 |
|
|