|
|
|
National Stock Number:
5307-00-208-3841
Federal Supply Class:
5307
National Item Identification Number:
002083841
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 91045-4 | 70210 | HONEYWELL INTERNATIONAL INC. | | 91045-4 | 72599 | ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO |
|
Techincal Specification:
| MATERIAL | STEEL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 1112 ASSN STD SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL C FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | OVERALL LENGTH | 1.850 INCHES MINIMUM AND | | 1.910 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNF STUD THREAD | | NOMINAL THREAD SIZE | 0.190 INCHES NUT THREAD | | 0.190 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | 3A STUD THREAD | | THREAD QUANTITY PER INCH | 32 NUT THREAD | | 32 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.260 INCHES MINIMUM AND | | 1.350 INCHES MAXIMUM NUT THREAD | | 0.410 INCHES MINIMUM AND | | 0.470 INCHES MAXIMUM STUD THREAD | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.900 INCHES MINIMUM AND | | 0.110 INCHES MAXIMUM FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.046 INCHES MINIMUM AND | | 0.050 INCHES MAXIMUM FIRST HOLE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 70210 | | DESIGN CONTROL REFERENCE | 91045-4 |
|
|