|
|
|
National Stock Number:
5307-00-208-2042
Federal Supply Class:
5307
National Item Identification Number:
002082042
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 54611P12 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 7456 ASSN STD SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | OVERALL LENGTH | 1.650 INCHES MINIMUM AND | | 1.670 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | 0.312 INCHES STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 18 STUD THREAD | | THREAD PITCH DIAMETERS | 0.2933 TO 0.2959 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.710 INCHES MINIMUM AND | | 0.790 INCHES MAXIMUM NUT THREAD | | 0.620 INCHES MINIMUM AND | | 0.730 INCHES MAXIMUM STUD THREAD | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 77445 | | DESIGN CONTROL REFERENCE | 54611P12 |
|
|