|
|
|
National Stock Number:
5307-00-208-0521
Federal Supply Class:
5307
National Item Identification Number:
002080521
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 363692 | 06848 | HONEYWELL INTERNATIONAL INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8630 | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6280 ASSN STD SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 0.969 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.190 INCHES NUT THREAD | | 0.190 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 32 NUT THREAD | | 24 STUD THREAD | | THREAD PITCH DIAMETERS | 0.1688 TO 0.1704 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.406 INCHES MINIMUM NUT THREAD | | 0.407 INCHES MINIMUM STUD THREAD | | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.125 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.044 INCHES MINIMUM AND | | 0.048 INCHES MAXIMUM FIRST HOLE |
|
|